| 释义 |
Combustion chambers短语¹⁸⁰⁰⁹⁸⁺¹
基本例句
燃烧室
It supplies the high-voltage surges that ignite the compressed air- fuel mixture in the combustion chambers.
提供高压电脉冲点燃燃烧室中空气和燃油的高压混合气。 jukuu
Its rugged housing IP65 allows static pressures to be measured accurately in combustion chambers and other hostile air management applications.
牢固的外壳 IP65可以使静态压力在燃烧室和其他的空气管理应用领域内被精确的测量。 www.e-gtm.com.cn
The combustion chambers of the engine are surrounded by pockets.
发动机的燃烧室被凹槽围绕着。 kuenglish
Block and the head must BE tight and able to withstand the pressure and heat developed in the combustion chamBErs.
气缸体与气缸盖之间的接合处必须保持密封，并且能够承受燃烧室产生的高压和高温。 ebigear
Coking is done in tall and narrow coking Chambers, or ovens. The ovens are externally heated by combustion Chambers of the same length and height.
炼焦是在又高又窄的碳化室中进行的。碳化室由高度和长度相同的燃烧室从外部加热。 ebigear
Even with more advanced designs, poorly insulated combustion chambers can add to the cooling effect and thus to the inefficiency.
就算有了更先进的设计，绝缘不好的燃烧室也会导致冷却效果，并进而导致效能低下。 ecocn
In this paper, the squish flow patterns in various combustion chambers of diesel engines obtained by means of shallow water modeling method and visualization technique are reported.
本文报导了用浅水模拟法和流动显示技术获得的各种不同形状柴油机燃烧室中的挤流流谱； cnki
Research for the distribution of gas concentration in diffusion flames is of great importance to heat exchange and temperature distribution in combustion chambers or heating furnaces.
火焰中的浓度场燃烧场对于炉内的温度分布及热交换过程有重要影响。 cnki
Some in- cylinder three-dimensional 3D flow patterns for three different diesel combustion chambers have been computed by means of multidimensional modeling.
本文利用多维数值模拟方法，进行了3个柴油机燃烧室方案下缸内三维流场的计算。 cnki
The engine has four combustion chambers.
该发动机有四个燃烧室。 huixue
The flows in combustion chambers with film cooling slots and secondary air holes are numerically simulated under different conditions.
对存在冷却槽、主燃孔等不同流动条件下的流态进行了数字模拟。 cnki
The matched condition and its resulting analysis of five combustion chambers and two kinds of nozzles are introduced with special emphasis.
文中着重介绍了五种燃烧室和两种油嘴的配合情况及其结果的分析。 cnki
The method can be used for combustion chambers with any shape to match the fuel injection pressure, nozzle construction, injector position and intake swirl ratio with chamber shape.
该方法可适于任意形状的燃烧室，能反映出喷油压力、喷油嘴结构及安装位置、进气涡流比等参数与燃烧室形状的匹配关系。 aojauto
The optimized matched relations between the combustion chambers and the nozzle configurations are found by the mode test, and the whole process is recorded by a common cinematograph.
通过模拟试验．研究燃烧室形状与喷油嘴结构的最佳配合，并用一般电影摄影机可将全部运动过程记录下来。 cnki
We use the Perfectly Stirred Reactor PSR model to analyze the combustion and heat transfer processes in either the conventional or the modified combustion chambers.
采用均匀搅拌反应器 PSR模型，研究了炉内的燃烧与换热过程，建立了相应的传热模型，并对系统热效率进行了分析。 chemyq
The joint between the cylinder block and the head must be tight and able to withstand the pressure and heat developed in the combustion chambers.
气缸体与气缸盖之间的结合处必须保持密封，并且能够承受燃烧室产生的高压和高温。 mapeng |