| 释义 |
bi·metal 英baɪ'metl美'baɪ'mɛtl COCA²⁵⁴³³⁷⁺⁶iWeb⁵⁰³²⁰
基本英英搭配记法近义反义派生词例句例句
n.双金属板³⁴;复合钢材³³adj.双金属的³³;金银复本位制的复数bimetals
Noun:
material made by bonding together sheets of two different metals
Adjective:
formed of two different metals or alloys; especially in sheets bonded togetherbimetal piston双金属活塞bimetal thermometre双金属温度计…bimetal sheet双金属板bimetal thermoregulator双金属片温度调节器…bimetal lamp双金属灯bimetal strip双金属条bimetal element双金属片bimetal casting双金属铸造bimetal blade双金属刀形开关…bimetal thermometer双金属温度计…bimetal relay双金属继电器…bimetal wire双金属线bimetal compact双金属坯块bimetal compensator双金属补偿器…bimetal plate双层金属版bimetal release双金属开关,双金属片…bimetal heater双金属加热器…bimetal contact双金属触点thermostatic bimetal恒温双金属
bi-两|双-metaln.金属⇒n.双金属板³⁴;复合钢材adj.双金属的³³;金银复本位制的近义词 bimetallic二金属的
Pbimetallismn.复本位制Pbimetallistn.复本位制论者
形容词57%,名词43%
用作形容词The component metals of thebimetaloften fracture during extrusion due to unsuitable parameters.双金属在挤压成形时，如果工艺参数选用不当，往往导致组元金属的韧性断裂。 A new equipment of continuous core- filling casting for bimetal composite materials about copper cladding aluminum is designed and produced.
设计和制造成一台制备铜包铝的连铸充芯试验机，特点是，结晶器为水冷铜内衬石墨套； cnki
High chromium white iron grey iron bimetal in EPC V process has been investigated.
采用消失模铸造生产铬系白口铁-灰铁双金属材料。 chemyq
The analytic results show that the model is effective for the analysis of the tube extrusion, tube drawing, bimetal tubing, impact extrusion, ironing cup and so on.
研究表明，这是一种非常适用于空心圆制品和双金属棒材、管材的挤压、拉拔、冲挤和变薄拉深等塑性加工中力学分析的十分有效的方法。 cnki
The component metals of the bimetal often fracture during extrusion due to unsuitable parameters.
双金属在挤压成形时，如果工艺参数选用不当，往往导致组元金属的韧性断裂。 cnki
Third, the experiment of bimetal rolling has been done, and through the comparisons, the simulation is more accurate than the slab method.
进行了双金属轧制的实验，通过与理论分析结果对比，认为仿真分析比工程法分析更精确。 cnki
This paper described the mixed state of transitional zone of dipper teeth for bimetal composite cast by mean of hydraulic simulation with fluids of different viscosity.
用不同粘度的流体通过水力模拟的方法近似地描述了双金属斗齿过渡区的混合状态。 dictall
A series of bimetal coordination complex fibers with different content of metal were prepared by controlling the concentration of metal ions and reaction time.
通过控制金属离子的浓度和反应时间制得一系列不同金属含量的双金属配合物纤维。 cnki
According to the basic theories of explosive mechanics and explosive welding, a new lower limit of explosive welding parameter window for bimetal was deduced.
文章总结了已有的爆炸焊接参数窗口理论，根据爆炸力学与爆炸焊接基本原理，发展出双金属爆炸焊接参数窗口的下限理论。 cnki
An Invar shadow- mask kinescope with a large screen and high definition requires temperature compensation by means of a laterally-welded bimetal spring lamination with a smaller bending displacement.
对采用因瓦荫罩的大屏幕、高清晰度彩管，需要较小弯曲位移量的横拼双金属弹簧片进行温度补偿。 cnki
Based on the characteristics of the Al- Si bimetal driving structure, the microflow sensors are integrated on the same chip.
该方法在原微流量泵双金属驱动结构的单晶硅膜上集成制作了微流量传感器。 cnki
In this text, the bonding mechanism of bimetal is attempted to inquire into and carry on theoretical analysis to bonding, and find out the reasonable rolling condition.
本文试图探讨双金属轧制连接的机理，对轧制连接进行理论分析，探寻轧制参数对轧制连接的影响规律，找出合理的轧制条件。 cnki
Selecting cast aluminum alloy and cast steel as inner loop and outer loop of the bimetal compound casting respectively, the casting was produced by induction heating in mold.
双金属复合铸件外圈采用铸造铝合金，内圈选取碳素结构钢，采用型内感应加热工艺进行复合。 dictall
Shenyang Metro East sub-machine composite mill, built in2003, is specialized in production of bimetal composite key enterprises.
沈阳市新城子东机复合板厂，始建于2003年是我国专业生产双金属复合材料的骨干企业。100ye
Temperature measurement and process monitoring is stringently claimed in the technology of bimetal centrifugal casting.
双金属离心铸造工艺，对温度测量和生产过程的监测要求严格。 cnki
The CAD system for the drawing of the bimetal sheet was introduced and an example was also given.
本文介绍了自行研制的双金属板材拉延成形的 CAD系统，并给出了设计实例。 cnki
The cup and cone-shaped fractures often occur when a high strength bimetal composite wire is drawn.
在高强度双金属复合导线的拉拔过程中，往往产生杯锥状断口的断裂形貌。 dictall
The production technique and main parameters of bimetal composite pipe—compounding high chromium cast iron in inner wall of steel pipe, by long launder centrifugal casting are presented.
该工艺可实现双金属复合管的加长、减薄复合，壁厚均匀，双金属复合管的使用性能和经济性能可极大提高。 dictall
The reason for the inferior fatigue strength of some home made bimetal bushes, improvement approach and sintering mechanism were discussed.
分析了某些国产同类及金属轴套抗疲劳性能低的原因，并对其改进途径及烧结机理进行了探讨。 chemyq
The relationships among properties, cold rolling process and stabilizing treatment had been investigated for the laterally welded bimetal strips of high expansion component alloy304.
对彩管用横拼双金属材料中的高膨胀组元合金304钢带的性能与冷轧工艺、稳定化处理工艺之间的关系作了系统研究。 dictall
The special production line for bimetal saw strip electron beam continuously welding becomes the key equipment of solving the problems.
因此，专用于双金属锯带焊接的高压电子束连续焊接生产线，成为解决这一技术难题的关键设备。 cnki
The surface cracks of the bimetal strip sawblade was investigated in the paper.
对双金属带锯条表面裂纹的形成原因进行了分析。 cnki
The system is of reflective type and composed of thermostatic bimetal plate, lever piston framework, optical grating and optical fiber probes.
该系统具有反射式结构，由热双金属片、连杆-活塞机构、光栅及光纤探头组成。 cnki
This paper introduces successful construction method and control measure currently used for hole drill, borehole deviation, protection tube, and embedment and installation of bimetal mark.
介绍了目前比较成功的倒垂孔钻孔、钻孔偏斜、保护管安装、双金属标的埋设及安装等施工方法和控制措施。 dictall
This Paper Introdnces The Working Principle of Thermal Bimetal Element and Its Main Technical Performance.
本文介绍热双金属的工作原理、性能及基本参数。 chemyq
This paper introduces the properties of FPA sens therma bimetal and the method to select thermal bimetal.
本文介绍了热双金属的用途、性能及如何选择热双金属。 chemyq
Three typical AlSi bimetal driving membrane structures are analyzed in this paper.
对三种典型的铝硅双金属驱动膜片结构进行了有限元分析。 cnki
To enhance resolution of Ultrasonic Image System, an ultrasonic transducer used for testing bimetal clad layer was developed.
为了提高超声成像系统的分辨率，研制了用于检测双金属转子复合层扩散焊连接质量的超声换能器。 dictall
Bimetal copper- cladding aluminum bars with different transition layers were manufactured by continuous casting.
在双金属连铸铜包铝复合棒坯试验中，出现不同过渡层的制品。 cnki |