| 释义 |
sin·tered 英'sɪntəd美'sɪntəd COCA¹⁷⁹²²⁹BNC⁷⁹⁰⁷⁶⁺¹¹
基本英英例句
adj.烧结的⁶⁴;熔结的¹²;粘结的¹²动词sinter的过去式和过去分词形式¹².原型sinter的过去式和过去分词
Adjective:
formed into a mass by heat and pressure A series of hot powder forging tests was carried out to inspect the friction factors, fracture strain limits and density changes of sintered middle carbon alloy steel.
采用烧结圆环开式热锻试验方法，综合考察了中碳合金钢粉烧结材料热锻过程的摩擦因子、断裂应变极限和致密情况。 cnki
After inspected by SEM, the results indicated that the porous surface tubes sintered by the new process had high quality and strong joint strength.
采用扫描电子显微镜SEM对表面多孔管进行检测，结果显示用新工艺烧结的表面多孔层质量好、结合强度高。 cnki
Geometrical models are built for connected pores of the sintered porous metal. The mechanical compaction force is controlled to obtain the porous metal with the certain porosity.
建立了烧结金属多孔材料连通孔隙形成的模型，通过控制机械压制压力获得了一定孔隙率的金属多孔材料。 cnki
Made by mixing elemental or alloy powders and compacting the mixture in a die, the resultant shapes are then sintered or heated in a controlled atmosphere furnace.
通过混合元素或合金粉末并在模具中压实混合物，再烧结或在环境可控炉内加热制成最终形状。 mapeng
The application of powder injection molding in the production of bonded magnets and sintered magnets were discussed.
讨论了粉末注射成形在粘结磁体生产中的应用和烧结磁体研究开发的现状。 cnki
The dense ceramic products can be obtained using sintered magnesite as raw materials and alcohol as mixing medium.
以酒精力混合介质，烧结镁砂为原料获得致密的陶瓷烧结制品是可行的。 cnki
The electrical heating tube is made of U shaped steel tube, sintered magnesia and heating wire. It is immersed directly in the water for preventing heat loss.
电热管用 U型钢管，烧结氧化镁和电热丝制成，直接浸在水里热能损耗少。28006680
The processing and its requirement on manufacturing bonded permanent magnets and sintered magnets by MIM are discussed in detail.
详细介绍 MIM粘结永磁和烧结磁体的基本工艺过程及基本要求。 chemyq
The sintered copper powders for high strength and low noise oil pregnant bearings have been successfully developed, according to operation requirements for bearings.
根据含油轴承的特殊工况，研制出适用于高强度、低噪音的含油轴承专用烧结铜粉； cnki
This compacted material is placed in an oven and sintered in a controlled atmosphere at high temperatures and the metal powders coalesce and form a solid.
被压实的材料置于炉内烧结，在高温下炉内环境可控，金属粉末熔合形成固体。 mapeng
A new type of catalytic distillation column has been developed by means of surface modification and catalyst combination to sintered metal porous materials.
采用特定的方法对金属烧结多孔材料进行表面改性和催化剂复合，开发出一种新型的催化蒸馏构件。 dictall
As an important procedure for sintered and bonded magnets, orienting compression has direct influence on the property of the magnet.
取向成型是烧结和粘结磁体的一道重要工序，对最终磁体的性能有直接影响。 dictall
Compared with sintered magnets, bonded magnets have excellent attribute for processing and machining, so they have attracted wide attention in recent years.
与烧结磁体比较，粘结磁体具有优异的成形与加工性能，因此近年来引起了人们广泛的关注。 cnki
Dimensional control can be exercised on the as- sintered component as the injected density is sensibly uniform so shrinkage on sintering is also uniform.
烧结零件可以实现尺寸控制，因为注塑密度明显均匀，所以烧结收缩也是均匀的。 mapeng
Firstly, the sintered metal porous material is determined be used for rectifying tube after the experiment comparison of4 types and6 kinds of porous materials.
首先，通过对4种类型6种材料试验比较，最后确定以烧结金属多孔材料制作整流筒。 cnki
However, the porous Ti sintered by using domestic Ti powder presents elastic deformation, and brittle fracture occurs when the nominal strain is less than 2%.
但使用国内钛粉末烧结的多孔钛仅发生弹性形变，并且在应变<2%时就发生脆性断裂。 cnki
It is a relatively appropriate way at present to improve the strength and toughness of sintered steel by adopting copper impregnating technology.
用浸铜工艺来提高烧结钢强度和韧性是目前比较合适的方法。 cnki
It is clarified that the specimens of smaller mixing and injection machines were smaller variation in weight loss, sintered density and strength.
结果表明，较小的混炼机和注射机制造的试样，重量损失、烧结密度和强度的变化程度较小。 cnki
It shows that ceramic material with good performance can be obtained by sintered technique to change crystal phase in ceramics product.
这表明，可以通过烧结工艺改变陶瓷制品中的晶相，从而获得性能优良的陶瓷材料。 cnki
Its sinter has high toughness, excellent sintered property and bending strength owing to martensitic transformation.
其烧结体由于马氏转变而具有高的韧性，优良的烧结性能和抗弯强度； www.chemol.com.cn
Powder forged parts generally are not as close to final size or shape as cold pressed and sintered parts.
粉末锻造零件通常不像冷挤压和烧结零件那样接近最终尺寸或形状。 mapeng
PPL is one of the worldwide suppliers of seawater-based large crystal sinter and, with110 employees, produces roughly70,000 metric tons of sintered magnesia annually in the north of Dublin.
PPL公司位于爱尔兰都柏林北部，是世界上从事海水提炼大结晶镁砂的著名生产企业，员工110人，年产结晶镁砂约7万吨。 yeeyan
Raw graphite powder made from graphite ores and treated by various methods was sintered at high temperature to obtain higher pure graphite powder for synthesizing diamond.
对石墨矿石采用不同的处理方法得到了原料石墨粉，再经高温烧结获得了高纯度合成金刚石所需的石墨粉。 cnki
The SM master alloy was used to add high oxygen affinity elements Mn and Si into the sintered steel as alloying elements to improve the mechanical properties.
通过添加硅锰母合金，将硅、锰这两种对氧亲和力较高的元素加入到烧结钢中，以改善烧结钢的力学性能。 cnki
The basic properties of sintered powder materials in plastic deformation are explained. Some defects in present yield criteria of the materials are analysed.
阐述了粉末烧结材料塑性变形的基本性质，分析了粉末烧结材料现有屈服条件中存在的问题。 cnki
Using sintered B4C as target material, ternary BCN thin films were synthesized by means of pulsed laser deposition assisted by nitrogen ion beam.
以烧结 B4C为靶材料、在氮离子束辅助下用脉冲激光沉积方法制备了三元化合物硼碳氮 BCN薄膜。 chemyq
Sintered NdFeB permanent magnetic material has outstanding magnetic properties.
烧结钕铁硼永磁材料具有优异的磁性能。 cnki |