| 释义 |
aus·ten·ite 英ˈɔːstəˌnaɪt美ˈɔstəˌnaɪtAHDôʹstə-nīt' iWeb⁵⁰⁸⁰²
基本英英搭配例句例句
n.冶奥氏体一种含铁碳化物或含碳铁形容词austenitic
Noun:
a solid solution of ferric carbide or carbon in iron; cools to form pearlite or martensiteaustenite welding不锈钢焊接austenite former奥氏体形成元素…eutectic austenite共晶奥氏体decomposed austenite分解的奥氏体…residual austenite残留奥氏体austenite stabilizer奥氏体稳定剂…primary austenite初生奥氏体overcooling austenite过冷奥氏体austenite matrix奥氏体晶体austenite stabilization奥氏体稳定化处理…carbon austenite含碳奥氏体retained austenite残留残余奥氏体…austenite region奥氏体区域austenite structure奥氏体组织
名词100%
用作名词With increasing tempering temperature, the retainedaustenitedecreases.回火温度升高，其残余奥氏体量逐渐减少。
Melting Residual Stress is the main factor Causing Stress errosion damage on Austenite Rustless Steel's Structures.焊接残余应力是奥氏体不锈钢发生应力腐蚀破坏的重要因素。 The letter A is commonly used for austenite, F for ferrite, G for graphite.
通常用字母 A表示奥氏体，字母 F表示铁素体，字母 G表示石墨。 wowenni
The original structure consists of deformation induced martensite, quenching martensite and retained austenite.
原始材料的组织状态为形变马氏体、淬火马氏体及残余奥氏体。 cnki
A new explanation of reason why the rolling contact fatigue life can be prolonged by residual compressive stress and retained austenite was advanced.
并对残余压应力和残余奥氏体可以提高接触疲劳寿命的原因提出了新的解释。 cnki
According to the tempering temperature and hardness curve, the redistribution of residual stress is associated with the transformation of residual austenite.
由回火温度与硬度变化曲线证实，残余应力重新分布是与残余奥氏体转变相关联。 cnki
An austenite shell is formed over the entire surface of the graphite nodules.
在石墨球的整个表面形成了一层奥氏体壳。 wowenni
At high temperatures, the material is entirely austenite, but upon cooling enters a region where the stable phases are ferrite and austenite.
在较高温度时，这种材料全部是奥氏体，但随着冷却就进入到铁素体和奥氏体稳定状态的区域。 mapeng
Carbon- poor area forms by way of random fluctuation and carbon atom diffusion. Bainitic ferrites nucleate in carbon- poor austenite.
依靠随机涨落，形成贫碳区，贝氏体铁素体在贫碳的奥氏体中形核。 cnki
CRITICAL TEMPERATURE: Temperature at which, upon heating, a steel transforms into the structure called Austenite. For most steels this occurs between1350 degrees F. and1500 degrees F.
临界温度：钢材加热使得内部结构产生奥氏体时的温度。通常大部分钢材的临界温度在华氏1350度到1500度之间。 chuangjiyuan
During the tempering process, the austenite in bainite decomposed into ferrite and cementite by diffusion transformation.
在回火过程中，贝氏体中的奥氏体以扩散转变方式分解为铁素体和渗碳体。 cnki
In primary loop in nuclear plants, the Cast Austenite Stainless Steel CASS under operation temperature will face to the issue of thermal aging besides of irradiation damage.
在核电站一回路中，奥氏体不锈钢铸件 CASS在运行温度下长期工作除了受到辐照损伤外，还将面临热老化问题。 dictall
It had been proved in controlled rolling test that the reduction and deformation temperature were the most effective factors to the size of recrystallize austenite grain.
控轧试验证实，形变量和形变温度对再结晶奥氏体晶粒尺寸的影响最大。 cnki
Measures should be taken to prevent the vertical snake tube from steam binding, iron oxide depositing, and austenite corrosion when superheater is cleaned.
过热器整体清洗时，应有防止垂直蛇形管产生汽塞、铁氧化物沉淀和奥氏体腐蚀的措施。 blog.sina.com.cn
Moreover, the variation of seasons temperature may influence the stability of retained austenite which also affects the hardness of ring travellers.
另外，季节气温的变化可以影响残留奥氏体稳定化的程度，从而也影响钢丝圈的硬度。 cnki
On the non preheating cladding layer, the eutectic austenite dendrite growth is along the opposite direction of temperature gradient beginning from interface to face of cladding layer.
在未预热的熔覆层内，先共晶的奥氏体枝晶的生长，从界面开始逆温度梯度方向定向生长，直到熔覆层的表面。 cnki
Retained austenite reduction and carbide precipitations in the martensite are anticipated by the tempering process.
减少残余奥氏体和马氏体碳化物的降水预计的回火工艺。 blog.sina.com.cn
Some methods of retained austenite measurement on high chromium cast iron were compared.
对高铬铸铁残余奥氏体测定的几种方法进行了比较。 chemyq
Temperature at which, upon heating, a steel transforms into the structure called Austenite. For most steels this occurs between1350 degrees F. and1500 degrees F.
钢材加热使得内部结构产生奥氏体时的温度。通常大部分钢材的临界温度在华氏1350度到1500度之间。 aotongchangsheng
The paper discusses the conditioning and stabilization of austenite during tempering, and the suggested new tempering process based upon the results of research on high speed steels.
论述了高速钢回火时奥氏体的催化作用和稳定化现象的工作，以及根据研究结果所拟定的回火新工艺。 cnki
The deformation temperature is the main factor which affects the grain size of austenite or ferrite when the strain rate is not changed largely.
说明在变形速率不太高的情况下，变形温度是影响奥氏体或铁素体晶粒尺寸的主要因素。 cnki |